Press the SET button to confirm and exit, press ESC to cancel and exit
After selecting the Configure Zone menu using the Encoder (only if MODE = Zone)
Pressed the SET button then via Encoder you can select between Zone 1 – 8 Zone outputs
....
Press the SET button to confirm and exit, press ESC to cancel and exit
MASTER MODE MODE
•
Select Input
: Via this menu you can select and set the Gain control and input Mute
•
Select Output
: Via this menu, you can configure the volume and Mute
•
Load Program
: Through this menu you can load anyone of the
6
presets
•
Info
: Via this menu the model, version and ID set is displayed
•
Lock
: Through this menu it is possible to Lock the CP8
1.
SELECT INPUT
SYSTEM SETUP
Configure Stand-by
SYSTEM SETUP
Configure Zone
Configure Zone
Zone = 01
SYSTEM SETUP
Configure Zone
Configure Zone
Zone = 02
Configure Zone
Zone = 08
CP8 CTRL PANEL
Select Input
CP8 CTRL PANEL
Select Output
CP8 CTRL PANEL
Load Program
CP8 CTRL PANEL
Info
CP8 CTRL PANEL
Lock
CP8 CTRL PANEL
Select Input
