Sound Choice Pro Audio CP8, Руководство пользователя

Страница: 13 / 16

and after 2 sec. The Eth led will turn off and the system will go back to the menu
If communication is successful, then the display will show the current status of the Mute
Using Encoder to change the status of the Mute from ON to OFF or vice versa in real-time and the
parameter will be updated on DPA880T
Press the Esc key to return to the start screen
If you selected Volume and press SET, on the display you will see the following screen
the Eth led will turn on because the system sends a message to DPA880T asking for the current
status of the volume for the selected zone.
If the CP8 is not connected to the DPA880T or the ID is not correct then on the display will appear
the following message
and after 2 sec. The Eth led will turn off and the system will go back to the menu
If communication is successful, then the display will display the current Volume Status
... ...
Zone 2
Mute
Zone 2
Mute
Volume [dB]
Step=0.1dB V=
Zone 2
Volume
Volume [dB]
Step=0.1dB V=-
127.0
Volume [dB]
Step=0.1dB V=0.0
Volume [dB]
Step=0.1dB
V=+18.0
Mute
Device not connected
Mute
Mute = Off
Mute
Mute = On
Volume [dB]
Device not connected