After pressing the SET button, via Encoder you can select between Inputs 1 - 8.
.............
After selecting an Input (eg. Input 2) press the SET button to select the Mute or Gain by using the
Encoder
If you select Mute and press SET, on the display you will see the following screen
the Eth led will turn on with the system sends a message to DPA880T asking for the current status
of mute on the selected input.
If the CP8 is not connected to the DPA880T or the ID is not correct then the display will show the
following message
and after 2 sec. The Eth led will turn off and the system will go back to the menu
If communication is successful, then the display will show the current status of the Mute
through Encoder it is possible to change the status of the Mute from ON to OFF or vice versa in
real-time and the parameter will be updated on DPA880T
Press the Esc key to return to the start screen
Select Input
Input 1
Select Input
Input 2
Select Input
Input 8
Input 2
Mute
Input 2
Gain
Input 2
Mute
Input 2
Mute
Mute
Mute =
Mute
Device not connected
Mute
Mute = Off
Mute
Mute = On
