SORG MIO MOVE Скачать руководство пользователя

Страница: 24 / 36

Mio Move

(1)

(A)

(2)

(A)

(B)

(A) (B)

(3)

(A)

(C)

(B)

3.8.3 Drum brake as driving brake

In order to brake:

• (1)

Pull the control lever up

(A)

and apply

the same pressure to both brake levers,

otherwise you will swerve unwillingly.

• (2)

Only use the blocking lever

(B)

to secure

the control levers in a locked position.

ATTENTION

Avoid sudden braking: HAZARD OF FLIPPING OVER!

3.8.3 Drum brakes as wheel lock

(3)

To fasten the drum brake,

• pull the lever up

(A)

(or towards you) until the

blocking levers

(B)

snap into the notches

(C)

• The control lever should not be able to move

down anymore.

To unlock,

• pull the control levers

(A)

a little further up

until the blocking levers

(B)

automatically

unlock.

ATTENTION

The wheelchair, with passenger (max. load

capacity), must be able to stand safely on a ramp

with a 7°slope (=12.3%) while the wheel lock is

activated.

ATTENTION

Consider the safety instructions and the possible

impairments.

Содержание MIO MOVE





































Результаты поиска

Содержание MIO MOVE

Отзывы:

Похожие инструкции для MIO MOVE

Бренды по названию

Популярные бренды

SORG MIO MOVE, Руководство пользователя

Результаты поиска

Содержание MIO MOVE

Отзывы:

Похожие инструкции для MIO MOVE

Бренды по названию

Популярные бренды