SORG MIO MOVE Скачать руководство пользователя страница 30

Страница: 30 / 36

Mio Move

4.4

TIRE CHANGE

With a little bit of technical skill and suitable tools, you can

fix a flat tire yourself. It is advisable to always carry a repair

kit and an air pump for emergencies. Suitable air pumps

can be purchased at your specialty store. An alternative

would be a puncture repair spray which fills your tire with

setting foam (available at the specialty store).

Dismounting

In case of a flat tire, remove the tire carefully from the rim

with suitable mounting tools. Make sure not to damage the

rim or the tube in the process.

Repair

Repair the tube according to the indications given on the

reparation set, or replace it with a new one. Examine the

rim and the interior of the tire for foreign objects which may

have caused the flat tire.

Only use rim bands which are in perfect condition to

protect the tube from damage caused by spoke ends.

Mounting

Push the rim band over the valve and place the valve into

the rim. Unscrew the valve screw nut. Now you can draw

up the rim band effortlessly. Make sure that all spoke ends

are covered.

Now push the lower tire part over the bead of the rim.

Inflate the tire until round. Insert the weakly inflated tube

into the tire cover. Check the tube for smooth fit. Then

you can easily mount the upper part of the tire behind the

bead of the rim with both hands. Start with the part of the

valve which is faced away.

Inflation

Check if the tube is perfectly clamped between tire and

cover.

Check the valve fitting.

First inflate the tire with just enough air so you can still

push in with your thumb. Check the fit of the tire on the

rim. If the tire cover is not centered on the rim, deflate the

tire a bit and readjust it.

Then inflate the tire to its maximum operating pressure

(see tire cover) and close the valve with the protection cap.

4.5 MAINTENANCE

4.5.1 Cleaning and care

�

INDICATION

Never treat the wheelchair with a high pressure cleaner!

Please use silicon free, water based cleaning and care

supplies.

The indications on application given by the manufacturer

are to be followed. Do not use any aggressive cleaning

supplies such as dissolvers or hard brushes etc.

COATING

To tend the finish, we recommend using customary

branded finish care products. Should the coating still be

damaged through scrapes, hits etc. you may correct those

spots with a touch up applicator available in the specialty

store (apart from metallic and dormant colors).

PLASTIC PARTS

The clothing protection and similar parts consist of high

quality plastic. Only clean these parts with warm water and

neutral cleaning agents or soft soap.

PLEASE NOTE:

When using customary plastic cleaners, the indications

on application given by the manufacturer are to be

followed.

CUSHIONS AND COVERS

The covers of the molded firm seat and back parts may be

removed with the zippers. We recommend washing them

regularly with a mild detergent and low temperature in the

washing machine.

PLEASE NOTE:

Please clean other cushions and covers (e.g. from seat

shells) with warm water and hand soap.

Many stains can be removed with a sponge or a soft brush.

In case of doubt, please consult the medical supply store,

which built your seat shell, for advice on cleaning the cover.

FRAME

The frame and wheels must be cleaned regularly with a

damp cloth and mild cleaning agent.

Please dry well after.

CASTERS

Please remove rough dirt regularly from the casters, clean

them with a damp cloth and mild cleaning agent and dry

well. Please grease the wheel bearings and similar parts

with customary grease.

PLEASE NOTE:

Please check the frame for corrosion damages as well as

other damages on a regular basis. Oiling all versatile parts

lightly and regularly obviates such damages and assures

long use of your wheelchair.

Содержание MIO MOVE





































Результаты поиска

Содержание MIO MOVE

Отзывы:

Бренды по названию

Популярные бренды

SORG MIO MOVE, Руководство пользователя

Результаты поиска

Содержание MIO MOVE

Отзывы:

Бренды по названию

Популярные бренды