User Manual
27
3.14 PUSH AID FOR OUTSIDE (OUTDOOR
FRONT END)
(1)
With the Outdoor Front End it is made possible to
drive on uneven surfaces.
Additionally, spasm causing vibrations when driving
are visually reduced.
Mounting the Outdoor Front End
• Close the wheelchair’s wheel locks.
• Tip the wheelchair slightly back and /or place
on the jack up aid.
• (2)
Place the end of the cone pipe
(A)
from
the front into the holding plate
(B)
.
• Then, guide the height adjustment
(C)
all the
way onto the holding plate
(D)
,
• (3)
Both bushings
(A)
of the height
adjustment
(B)
must be guided into the
location holes
(C)
of the holding plate
(D)
.
• (4)
Turn the star knob
(A)
on the back of
the holding plate
(B)
as tight as possible,
because with it, the outdoor front end is
fixated to the wheelchair.
To remove the Outdoor Front End, please proceed in
the opposite order.
ATTENTION
The push aid can only be attached when the user is
not in the wheelchair.
ATTENTION
The push aid is built only for a max. speed of 8
km/h. A higher speed is not allowed.
ATTENTION
A great amount of caution is to be taken when
going up or downhill.
ATTENTION
We strongly advise you to let your rehab technician
adjust the height of your outdoor front end.
Changing the height (angle of the wheelchair
backwards) influences the tilting of the wheelchair
massively.
�
INDICATION
If possible (depending on the setting) it is
recommended to use the anti-tipper.
(2)
(A)
(C)
(B)
(D)
(1)
(3)
(A)
(C)
(D)
(B)
(4)
(A)
(B)
Содержание MIO MOVE
Страница 1: ...User Manual 1 Mio Move User Manual ...
Страница 28: ...Mio Move 28 ...
