SORG MIO MOVE, Руководство пользователя

Страница: 10 / 36

Mio Move
10
2.4 OVERCOMING OBSTACLES
A WHEELCHAIR IS NOT FOR CARRYING. For this
reason avoid stairs! Whenever possible, ramps
or elevators should be used to overcome height
differences.
ATTENTION
BE SURE THAT THE ECCENTRIC CLAMP OF THE
ANGLE ADJUSTABLE PUSH HANDLES ARE CLOSED
TIGHTLY AND OPERATIVE.
ATTENTION
NEVER CARRY THE WHEELCHAIR BY THE SEAT
SHELL, THE LEG SUPPORT AND/OR THE FOOT
REST/S.
ATTENTION
(1) NEVER overcome stairs etc. with the wheelchair
ALONE.
ATTENTION
(2+3) Only overcome stairs with the help of two
experienced people. For this, the anti-tipper must
be deactivated. Be sure that the wheelchair is only
held by metal parts which are bolted securely to
the frame.
ATTENTION
Do not under any circumstance use escalators,
not even with a carer. Shopping malls and public
buildings with escalators always have elevators as
well.
ATTENTION
Do not drive towards, for example, curbsides
without braking, DANGER OF TIPPING OVER!
ATTENTION
(4) In order to overcome height differences or when
using an elevator and lifting platform you generally
have to deactivate the anti-tipper. You could
become restricted in maneuverability.
(5) In order to overcome curbsides your carer should
slightly tilt you backwards, lift both casters over the
threshold and then, with the rear wheels, carefully
push the wheelchair over the edge. The anti-tipper
must be deactivated.
When driving off of the curb please proceed
correspondingly, but consider:
ATTENTION
For this, the casters must stay in the air until the
rear wheels are over the threshold. DO NOT put the
casters down first, DANGER OF FLIPPING OVER.
2.5 WHEEL LOCK
ATTENTION
THE KNEE LEVER BRAKES ARE ONLY THERE TO PUT
THE WHEELS IN A RESTING POSITION. THEY ARE
NOT DESIGNED TO SLOW THE WHEELCHAIR DOWN
WHILE DRIVING.
With a service brake, for example a drum brake,
controlled braking is possible.
ATTENTION
Before each (longer) drive make sure to check
•
the correct tire pressure (information is
on the outer tire)
•
and if necessary the brake pressing
bolt.
(4) (3)
(5)
(1) (2)