16 of 40
Service Record Loop
SORG
RS
2019-07-16
3.2.1 Frame arche for closed frame
3.2
Assembly Group Frame
For retrofitting the frame bows for a frame
closed at the front, proceed in the same way
on both sides of the frame as follows:
• (1)
Remove the steering wheel adapter
(3A)
including the half-shells
(3B)
on
both sides as described,
• remove the knee lever brakes if neces-
sary (see chapter "Brakes")
• and remove the caps at the end of the
frame tubes
(A)
and
(B)
.
• (2)
Insert the supplied sleeve
(C)
from
the front into the upper frame tube and
screw tight with the screw
(D)
in the
hole
(E)
provided.
• Place the frame bow on top of the
mounted sleeve
(C)
and at the same
time insert the pin
(F)
into the lower
frame tube at the bottom.
• Screw the frame bow at the top with the
screw
(G)
to the sleeve
(C)
.
•
Check the tightness of the fittings
(D
and G)
.
• (3)
Move the steering wheel adapters
(A)
and half shells
(B)
from the old
holes
(E + F)
into the new holes
(F + G)
,
• Mount the adapters
(A)
including the
half shells
(B)
with the screws
(H)
in the
new position
(F + G)
• and adjust the steering wheels to an
absolutely vertical position.
• Possibly. you must re-assemble and
adjust the toggle brakes (see chapter
"Brakes").
The steering wheels must be mounted
in the new position as the frame bow is con-
nected to the frame with the screws
(H)
for
the steering wheel adapter.
(A) (B)
(C)
(D)
(E)
(F)
(G)
(A)
(E)
(F)
(G)
(H)
(B)
(1)
(2)
(3)
Содержание Loop RS
Страница 4: ...4 of 40 Service Record LoopSORG RS 2019 07 16...
Страница 9: ...Service Record LoopSORG RS 9 of 40 2019 07 16...
Страница 34: ...34 of 40 Service Record LoopSORG RS 2019 07 16...
