SORG Loop RS, Сервисная книжка

Страница: 32 / 40

32 of 40
Service Record Loop
SORG
RS
2019-07-16
(C)
(D)
(F)
(E)
(B)
(A)
(1)
(A)
(B)
(2)
3.8 Assembly Group Frame equipment
3.8.1 Anit-tipper
Height of anti-tipper:
• (1) Remove the screws (A) .
• Pull the anti-tipper bar (B) down
• and displace the screw (A) in the alter-
native holes (C) ,
• retighten the screws (A)
• and release the anti-tipper bar (B) .
• Displacing the anti-tipper in the holes
(E) :
• (1) Remove the screws (D) ,
• place the distance pieces in between the
hole board and the holder (F) ,
• replace the screws (D)
• and tighten them.
•
Mounting the anti-tipper afterwards/additio-
nally:
• (1) Place the holder (F) on the holes (D) ,
• put in the screws (D)
• and tighten them.
3.8.2 Tipping lever
(2) Assembling the tipping lever:
• Guide the tipping lever (A) in the right
or left frame pipe,
• place the self-locking nuts (B) as well as
the saddle washer and locking washer in
the holes
• and tighten the nuts (B) .