manualshive.com logo in svg

Sorel TDC 3, Инструкция по установке и эксплуатации

Поделиться
Скачать
Sorel TDC 3 Скачать руководство пользователя страница 3

3

1.1 EC declaration of conformity

By af

fi

 xing the CE mark to the unit the manufacturer declares that the Temperature-

Difference-Controller 3, hereinafter refererred to as TDC 3 , conforms to the 
following relevant safety regulations:
-  

EC low voltage directive

 

73/23/EEC, as amended by 93/68/EEC

-  

EC electromagnetic compatibility directive

  

89/336/EEC version 92/31/EEC version 93/68/EEC

Conformity has been veri

fi

 ed and the corresponding documentation and the EC 

declaration of conformity are kept on 

fi

 le by the manufacturer.

1.2 General instructions It is essential that you read this!

These installation and operating instructions contain basic instructions and impor-
tant information regarding safety, installation, commissioning, maintenance and 
the optimal use of the unit. Therefore these instructions must be read completely 
and understood by the installation technician/specialist and by the system user 
before installation, commissioning and operation of the unit. 
The valid accident prevention regulations, VDE regulations, the regulations 
of the local power utility, the applicable DIN-EN standards and the installation 
and operating instruction of the additional system components must also be 
observed. The controller does not under any circumstances replace any safety 
devices to be provided by the customer!
Installation, electrical connection, commissioning and maintenance of the unit 
may only be carried out by specialists who possess the appropriate training.
For the user: Make sure that the specialist gives you detailed information on 
the function and operation of the controller. Always keep these instructions in 
the vicinity of the controller.

1.3 Explanation of symbols

Failure to observe these instructions can result in danger to life from 
electric voltage.

Danger

Danger

Failure to observe these instructions can result in serious damage to 
health such as scalding, or even life-threatening injuries.

Caution

Failure to observe these instructions can result in destruction of the 
unit or the system, or damage to the environment.

Caution

Information which is especially important for the function and   optimal 
use of the unit and the system.

Safety instructions

1

1

Содержание TDC 3













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды