23
Display mode
menu 3
8
8
8. Display mode
Menu “3. Display mode” is used to de-
fi
ne the controller’s display for normal
operation.
This display appears whenever two
minutes go by without any key being
pressed. The main menu appears
again when a key is pressed.
The menu is closed by pressing “esc”
or selecting “Exit display mode”.
8.1 Schematic
menu 3.1
In graphics mode, the selected hydraulic systems are depicted with the mea-
sured temperatures and operating states of the connected consumers.
8.4 Temperature Unit
menu 3.4
The controllers’ temperature unit can be switched between Celsius and Fahr-
enheit. Select the unit here.
8.2 Overview
menu 3.2
In overview mode, the measured temperatures and operating states of the
connected consumers are depicted in text form.
8.3 Alternating
menu 3.3
In alternating mode the schematic mode and then the overview mode are active
for 5 seconds at a time.
