
16
2. Statistics
Menu “2. Statistics” is used for function
control and long-term monitoring of the
system.
The menu is closed by pressing “esc” or
selecting “Exit statistics”.
2.1 Today
Flow temperature for the present day
In the graphical overview the characteristics of outdoor-and
fl
ow temperature for the
present day is shown from 0-24h. The right button changes the unit of time and the
two left buttons scroll through the diagram.
2.2 28-days
Flow temperature during the last 28 days
In the graphical overview the characteristics of the outdoor and
fl
ow temperature du-
ring the last 28 days is shown. The right button changes the unit of time (Days) and the
two left buttons scroll through the diagram.
2.3 Operating hours Heat Circuit
Display of operating hours of the heat pump connected to the controller, and the date
the measurement started.
2.4 Operating hours DHW
Display of operating hours of Domestic Hot Water pump connected to the controller,
and the date the measurement started.
2.5 Operating hours heating
Display of operating hours of additional heating, and the date the measurement star-
ted.
2.6 Error messages
Display of the last three errors in the system with indication of date and time.
2.7 Reset / clear
Resetting and clearing the individual statistics. Selecting “All statistics” clears eve-
rything except for the error log.
Statistics
Caution
For system data statistics it is essential for the time to be set accurately
on the controller. Please note that the clock continues to run for about
24 hours if the mains voltage is interrupted, and after that has to be
reset. Improper operation or an incorrect time may result in data being
cleared, recorded incorrectly or overwritten.
The manufacturer accepts no liability for the recorded data!