24
GB
C:\Users\yit_shinagawa_n1\Desktop\4723407111\4723407111XAVAX200UC\01GB-
XAVAX200UC\040CD.fm
masterpage: Left
XAV-AX200
4-723-407-
11
(1)
The operation buttons do not function.
q
Press the reset button (page 5).
Radio reception
The stations cannot be received.
The sound is hampered by noise.
q
The connection is not correct.
– Connect the REM OUT lead (blue/white striped)
or accessory power supply lead (red) to the
power supply lead of a car’s antenna (aerial)
booster (only when your car has built-in radio
antenna (aerial) in the rear/side glass).
– Check the connection of the car antenna
(aerial).
– If the auto antenna (aerial) will not extend,
check the connection of the power antenna
(aerial) control lead.
Preset tuning is not possible.
q
The broadcast signal is too weak.
RDS
PTY displays [PTY not found.].
q
The current station is not a RDS station.
q
RDS data has not been received.
q
The station does not specify the program type.
Picture
There is no picture/picture noise occurs.
q
A connection has not been made correctly.
q
Check the connection between this unit and
other equipment and set the input selector of the
equipment to the source corresponding to this
unit.
q
The disc is defective or dirty.
q
Installation is not correct.
– Install the unit at an angle of less than 45° in a
sturdy part of the car.
q
The parking cord (light green) is not connected to
the parking brake switch cord, or the parking
brake is not applied.
The picture does not fit in the screen.
q
The aspect ratio is fixed on the playback source.
There is no picture/picture noise occurs in the
rear monitor.
q
The color system setting is incorrect.
– Set the color system to [PAL] or [NTSC]
according to the connected monitor (page 17).
q
A picture from the camera is displayed on this
unit.
– No picture appears in the rear monitor if a
picture from the camera is displayed on this
unit.
q
Only DVD/USB video playing on this unit can be
displayed in the rear monitor.
q
While displaying the picture from the cameras or
car navigation system on this unit, the picture
from DVD/USB video is not displayed in the rear
monitor.
Sound
There is no sound/sound skips/sound cracks.
q
A connection has not been made correctly.
q
Check the connection between this unit and the
connected equipment and set the input selector
of the equipment to the source corresponding to
this unit.
q
The disc is defective or dirty.
q
Installation is not correct.
– Install the unit at an angle of less than 45° in a
sturdy part of the car.
q
The unit is in pause/reverse/fast-forward mode.
q
The settings for the outputs are not made
correctly.
q
The DVD audio level is too low (page 13).
q
The volume is too low.
q
The ATT function is activated.
q
The format is not supported.
– Check if the format is supported by this unit
(page 20).
Sound is noisy.
q
Keep cords and cables away from each other.
Disc operation
The disc does not play.
q
The disc is defective or dirty.
q
The disc is not playable.
q
The DVD is not playable due to the region code.
q
The disc format and file version are incompatible
with this unit (page 19).
q
Press
ì
to remove the disc.
Certain functions cannot be performed.
q
Depending on the disc, you may not be able to
perform operations such as stop, search, or
repeat/shuffle play. For details, refer to the
manual supplied with the disc.
The soundtrack/subtitle language or angle
cannot be changed.
q
During playback, touch
, then make the
desired settings.
q
Multilingual tracks, multilingual subtitles, or
multi-angles are not recorded on the DVD.
q
The DVD prohibits changing.
The disc will not eject.
The disc will not insert.
q
Press and hold the disc eject button.
010COV.book Page 24 Thursday, June 22, 2017 7:38 PM
