Sony VPL-FE100E, Руководство по эксплуатации

Страница: 10 / 120

10
(GB)
R/R-Y Y
C
8
VIDEO
8
VIDEO
VIDEO
AUDIO
IN
VIDEO
G/Y
B/B-Y
SYNC
/HD
VD
AUDIO
IN
L (MONO)
L
R
L
R
(MONO)
R
RS-
232C
RS-
422A
RS-232C/422A RS-485 IN OUT IN OUT
LIGHT
APA
VIDEO
INPUT A INPUT B INPUT C
PCI AUDIO
VOLUME
SELECT VIDEO/
S VIDEO
INPUT SELECT
RESET ENTER
MENU
FOCUS SHIFT ZOOM PATTERN
POWER SAVING LAMP FAIL
1 2
3 4
COVER FAIL
FAN FAIL
HIGHT TEMP
MUTING
PLUG IN POWER
IN
OUT
0 0
INPUT C INPUT B
INPUT A VIDEO
AUDIO OUT
REMOTE CONTROL S TRIG DEVICE INDEX
+
–
6 5 4 3 1 2
7 8 9 !º !¡ !™
+
Location and Function of Controls
Rear
1
Control panel
For details, see pages 8 (GB) and 9 (GB).
2
AUDIO OUT L/R jacks (phono type)
Connect to external active speakers.
The volume of the speakers can be controlled by the
VOLUME keys on the Remote Commander or the
control panel.
3
VIDEO connectors
Connect to external video equipment, such as a VCR.
Y IN/C IN (BNC type): Connect to the Y and C
video outputs of the video equipment.
S VIDEO IN (mini DIN 4-pin): Connects to the Y/C
video output of the video equipment.
S VIDEO OUT (mini DIN 4-pin): Used as loop-
through output via the Y/C IN connectors or the S
VIDEO IN connector.
VIDEO IN (BNC type): Connects to the composite
video output connector of the video equipment.
VIDEO OUT (BNC type): Used as loop-through
output of the VIDEO IN connector.
AUDIO IN L (MONO)/R jacks (phono type):
Connect to the audio output jacks of equipment,
such as a VCR. For stereo equipment, use both the
L and R jacks; for monaural equipment, use the L
(MONO) jack only.
Note
If you have video equipment connected to both the Y/
C IN and S VIDEO IN connectors, the signal from the
Y/C IN connectors are selected prior to the S VIDEO
IN connector. When projecting video connected to the
S VIDEO IN connector, be sure not to connect any
cable to the Y/C IN connectors.
Note on the VPL-FE100E model
The optional IFB-X2000E interface board is required
for using the VIDEO connectors.
4
INPUT A connectors
RGB input connectors (R/R-Y/P
R
, G/Y, B/B-Y/P
B
,
SYNC/HD, VD) (BNC type): Connect to the
video outputs of equipment such as a computer or
a video camera.
According to the connected equipment, the RGB,
component (R-Y, Y, B-Y), HDTV (YP
B
P
R
or
GBR) or DTV (YP
B
P
R
or GBR) signal is selected.
AUDIO IN L (MONO)/R jacks (phono type):
Connect to the audio output jacks of equipment
such as a computer or a video camera. For stereo
equipment, use both the L and R jacks; for
monaural equipment, use the L (MONO) jack
only.