Sony UP55MD, Руководство по обслуживанию

Страница: 15 / 74

1-7
UP-55MD
PS3
x
6
PS3
x
6
PS3
x
6
PS
3
x
6
90 mm or more
Required driver
Shield plate (A)
Protector
sheet (A)
Switching
regulator
Harness
Harnesses
BVTT
2.6
x
5
BVTT
2.6
x
5
BVTT
2.6
x
5
BVTT
2.6
x
5
Chassis stay
Top stay (R)
1-5. Replacing the Main Parts
1-5-1. Switching Regulator
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front panel assembly.
(Refer to Section 1-3-2.)
3. Remove the rear panel assembly.
(Refer to Section 1-3-3.)
4. Remove the MA-142 board. (Refer to Section 1-4-1.)
5. Remove the two screws, then remove the shield plate
(A) and protector sheet (A).
6. Disconnect the three harnesses from the connectors on
the switching regulator.
7. Remove the four screws, then remove the switching
regulator.
8. Attach the switching regulator in the reverse order of
steps 1 to 7.
1-5-2. Mechanical Main Unit Assembly
1. Remove the top cover. (Refer to Section 1-3-1.)
2. Remove the front panel assembly.
(Refer to Section 1-3-2.)
3. Remove the MA-142 board. (Refer to Section 1-4-1.)
4. Remove the four screws, then remove the chassis stay.
5. Remove the four screws, then remove the top stay (R).