Sony UP-971AD, Инструкция по эксплуатации

Страница: 18 / 46

Con
nec
tions
Connecting to a computer
18
Connecting to a
computer
Notes
• Before connecting the unit to a computer, turn off the
unit, computer, monitor, and all peripheral devices
connected to the computer.
• Before connecting the unit to the computer, disconnect
the power cord from the unit. Connect the power cord
to the unit only after connecting the unit and the
computer.
• Follow the connection procedures described in the
computer manual.
• Make sure that the cables are connected securely at
both ends.
• The unit drive software provided with the unit is not
suitable for using the unit connected to a network.
• Printer operation is not guaranteed when connecting
to the computer using the USB cable via a hub.
• Two or more units cannot be connected to a single
computer.
Connecting to the USB Connector
Install the printer driver to the computer
When you use Windows XP/Windows Vista:
After connecting this unit to the computer, turn on this
unit. For installing, refer to the Install Guide of the
supplied CD-ROM, and the Readme file.
When you use Windows 7/8:
Before connecting this unit to the computer, install the
supplied printer driver to the computer. For installing,
refer to the Install Guide of the supplied CD-ROM, and
the Readme file.
Note
When this unit is turned on, do not set a connected
computer to standby (suspended) or pause mode, as it
may cause a malfunction.
to (USB)
connector
USB connecting
cable