Sony UP-971AD, Инструкция по эксплуатации

Страница: 16 / 46

Pre
par
at
ion
Loading Paper in the Unit
16
4
Insert the paper into the groove of the paper tray
and pull it out through the paper exit.
Note
Place the paper near the center of the groove of the
paper tray (inside of the guide). Note that paper
jams may occur if the paper is placed at the edge of
the groove of the paper tray.
Note
Pull out the printing paper to remove any slack and
possible creases.
5
Press the OPEN/CLOSE button to close the paper
door.
You can also push the paper door to close it.
6
Remove the paper leading edge.
UP-991AD
After loading paper, press the FEED button to feed
out 15 to 20 cm (6 to 8 inches) of paper and press
the CUT button to remove it.
UP-971AD
After loading paper, press the FEED button to feed
out 15 to 20 cm (6 to 8 inches) of paper. Then use
the paper cutter to remove it.
Note
To use the UPT-210BL after printing with UPP-210SE/
UPP-210HD, clean the thermal head before printing.
Otherwise, fine stripes may appear on printouts.
FEED Button
CUT Button
15 to 20 cm
FEED Button