8
TV Operation
Changing The Programme Order Of The
TV Channels
The “Programme Sorting” option in the “TV Set Up” menu allows you to change
the order in which the channels (TV Broadcast) appear on the screen.
To do that: by using the menu system and after selecting the option, press
and then
proceed in the same way as in the section “Switching On the Video TV and
Automatically Tuning” (see step 5b) on page 6).
Manually Tuning The TV
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to
preset channels one by one to the programme order of your choice. To do that:
1
By using the menu system and after selecting the ”Manual Programme Preset”
option, press
. Then with
Programme
option highlighted press
. Press
or
to select on which programme number you want to preset the channel. Then press
.
2
After selecting the
Channel
option, press
. Then press
or
to select the
channel tuning (“C” for terrestrial channels or “S” for cable channels). Next press
.
After that, press the number buttons to directly enter the channel number of the TV
Broadcast. If you do not know the channel number, press
or
to search for it.
When you tune the desired channel, press
OK
twice to store.
• Repeat all the above steps to tune and store more channels.
Fine Tuning Channels
Normally the Automatic Fine Tuning (AFT) is operating, however by using the
“Manual Programme Preset” option in the “TV Set Up” menu you can manually
fine tune the Video TV to obtain a better picture reception in the case that the
picture is distorted.
To do that: while watching the channel (TV Broadcast) you wish to fine tune, and by
using the menu system select the “Manual Programme Preset” option. Press
. With
the
AFT
option highlighted, press
. Next press
or
to adjust the fine tuning
between -15 and +15. Finally press
OK
twice to store.
Skipping Programme Positions
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to
skip any unwanted programme numbers when they are selected with the PROGR
+/- buttons.
To do that: by using the menu system and after selecting the “Manual Programme
Preset” option, press
. Then with the
Programme
option highlighted press
. Next,
press
or
to select the programme number you want to skip. Press
. Then, select
the
Skip
option and press
. Next press
or
to select
Yes
. Finally press
OK
twice
to confirm and store.
• To cancel this function afterwards, select “No” instead of “Yes” in the step above.
Setting Pay-TV Channels
The “Manual Programme Preset” option in the “TV Set Up” menu allows you to
watch Pay-TV channels by connecting a Pay-TV decoder to the Scart connector
:
1/
on the rear of the Video TV.
To do that: by using the menu system and after selecting the “Manual Programme
Preset” option, press
. Then with the
Programme
option highlighted, press
. Next
press
or
to select the programme number with the scrambled channel and press
. Select the
Decoder
option and press
. Next press
or
to select
On
. Finally,
press
OK
twice to confirm and store.
• While you are recording a programme which is being recorded through the Pay-TV decoder, you will not
be able to view other programmes through the decoder.
Programme Sorting
Programme: 01 -> 01
Confirm:
Select channel: PROG + -
Select new position:
OK
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Decoder:
Confirm
OK
01
I
C 21
On
No
Off
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Decoder:
Confirm
OK
01
I
C 21
On
No
Off
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Decoder:
Confirm
OK
01
I
C 21
On
No
Off
Manual Programme Preset
Programme:
System:
Channel:
AFT:
Skip:
Decoder:
Confirm
OK
01
I
C 21
On
No
Off
