Sony Trinitron KD-32NX200U, Инструкция по эксплуатации

Страница: 36 / 48

Connecting other equipment
34
DIGIT
AL
DIGIT
AL
Connecting Other Equipment to the TV
A wide range of equipment can be connected to the TV through the front and rear sockets.
Connecting equipment to the rear sockets
Connecting a DVD player
Connecting a Decoder/Set top box
Connecting a Smartlink VCR
Smartlink is a direct link between the TV and a Smartlink VCR. Ensure your Smartlink
VCR is connected to the
C
socket labelled (
SMARTLINK
) i 3/ r 3
VCR
, using a fully
wired 21 pin scart lead. For more information on Smartlink, refer to your Smartlink VCR
instruction manual.
1. Connect a scart lead from the
B
socket of the TV to a scart socket on your
DVD player (refer to your DVD instruction manual)
2. Insert a DVD into the DVD player, then press the ‘PLAY’ button. The picture
appears automatically on the TV.
If not, press the
/
button on the remote control repeatedly until the
picture appears on screen.
3. Press the DIGITAL/ button when you wish to return to normal TV
operation.
1. Connect a scart lead from the
A
socket of the TV to a scart socket on your
set top box (refer to your set top box instruction manual).
2. Switch on your set top box. The picture appears automatically on the TV.
If not, press the
/
button on the remote control repeatedly until the
picture appears on screen.
3. Press the DIGITAL/ button when you wish to return to normal TV
operation
R/D/D/D L/G/S/I
ANALOGUE
1
2
DVD
VCR
s 3 3
(SMARTLINK)
DIGITAL
OPTICAL OUTPUT
MODEM
. . .
5V 200mA
DVD
Decoder/Set top box
Hi-Fi
D
Note: Connecting cables are not supplied.
MD/DAT
C
VCR
E
B
A
NX34-44.fm Page 34 Monday, September 16, 2002 2:37 PM