Digital features
23
OK
OK
The EPG menu
To select a programme for recording or timed display
1.
With the EPG menu on screen, press the
V
,
v
,
B
or
b
buttons to highlight a
future programme in the EPG menu that you wish to record, then press the
OK
button. The Timer screen appears.
2.
Press the
RED
button and your VCR will automatically record the selected
programme when it starts (only if your VCR has Smartlink facility), or press the
GREEN
button if you wish the programme to appear on your TV screen when
transmission begins.
Notes:
If you do not have a Smartlink VCR, a message appears on screen informing you to set the timer
on your VCR. Press the
RED
button to continue, then set the timer recording function on your
VCR to correspond with the programme you have selected for recording. Press the
BLUE
button
to remove the Timer display.
When a programme has been stored for recording, a solid bar appears in the EPG display
directly under the timer bar. This solid bar shows you the amount of time allocated to a recording,
and reminds you that you are unable to record any other programmes during that period of time.
To cancel a recording
1.
With the EPG menu on screen, press the
BLUE
button to display the Timer
List.
2.
Press the
V
,
v
,
B
or
b
buttons to highlight the programme/event you wish to
cancel.
3.
Press the
YELLOW
button to cancel.
To set the Manual Timer
1.
With the EPG menu on screen, press the
BLUE
button to display the Timer List
menu, then press the
RED
button to select ‘Manual Rec’. If your VCR does not
have Smartlink, a message will be displayed reminding you to set your VCR
timer. Press the
RED
button to display the ‘Manual Timer Setup’ menu.
2.
Press the
V
or
v
buttons to select the correct date. Press the
b
button to
highlight the start time.
3.
Press the
V
or
v
buttons to select the start time. Press the
b
button to highlight
the stop time.
4.
Press the
V
or
v
buttons to select the stop time. Press the
b
button to highlight
the programme.
5.
Press the
V
or
v
buttons to select the channel. Press the
OK
button to store.
The Timer List menu is displayed. The event is now stored in the Timer List.
Press the
BLUE
button to return to the main EPG screen.
6.
Press the RED button and repeat steps 2-5 if you wish to store further
programmes for recording.
7.
Press the
button to return to normal TV operation.
8.
Set the timer recording function on your VCR to switch on and off to
correspond with the programmes you have stored for recording.
Notes on Recording and Manual Timer modes:
After setting the recording you can put the TV into its standby mode, but do not switch off
completely or the recording will be cancelled. If you put the TV into standby mode, the standby
indicator on the front of the TV flashes green periodically to remind you that a recording has
been programmed. Once recording has started, do not change channels or switch to analogue
mode or the recording will be cancelled.
NX14-23.fm Page 23 Monday, September 16, 2002 12:55 PM
Содержание Trinitron KD-32NX200U
