Sony Trinitron KD-32NX200U, Инструкция по эксплуатации

Страница: 19 / 48

Digital features
17
OK
OK
1
4
7
3
6
9
2
5
8 8
0
The Main menu
Manual Tuning
This feature allows you to manually add digital channels one by one to your TV.
1. Press the button on the remote control to obtain the Digital Info display.
Press the BLUE button to display the Main menu.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button
to display the Detail Set-up menu.
3. Press the V or v button to highlight ‘Manual Tuning’ then press the OK button
to display the Manual Tuning menu.
4. Press the V or v button to highlight the chosen programme number for your
new channel. If you do not wish to select any of the programme numbers
listed, press the
RED or GREEN button to display the previous or next 5
programme numbers on the list.
5. With your programme number highlighted, press the OK button to display the
‘Manual Programme Search’ screen.
6. Press the V or v button if you wish to change the channel number, then press
the
b
button to make the select search box active.
7. Press the V or v button to begin the search process. The words ‘Searching
up’ or ‘Searching down’ appear in the select search box indicating that the TV
is searching. If no digital services are found on the channel you have chosen,
the channel number changes up or down automatically and the search
continues. When all services allocated to the selected channel have been
found, the service selection screen is displayed.
8. Press the V or v button to find and highlight the service you wish to allocate
to the programme number selected in Step 4, then press the OK button to
store.
9.
Repeat Steps 4 to 8 if you wish to manually add more channels to your TV.
Press the
BLUE button repeatedly to remove all menus from the screen.
PIN Code
This feature allows you to set a new 4-digit PIN code.
1. Press the button on the remote control to obtain the Digital Info display.
Press the BLUE button to display the Main menu.
2. Press the V or v button to highlight ‘Detail Set-up’ then press the OK button
to display the Detail Set-up menu.
3. Press the V or v button to highlight ‘PIN Code’ then press the OK button to
display the PIN Code menu.
4. Enter your existing PIN code using the numbered buttons on the remote
control. If you enter a wrong number, press the
RED button to clear and start
again.
5. Once you have entered your PIN code, a new PIN screen appears. Enter your
new PIN code, then enter once again as instructed for confirmation.
6. When both PIN codes match, a message appears to inform you that your new
PIN code has been accepted. This is the PIN code you must use in future
7. Press the BLUE button repeatedly until all menus are removed from the
screen.
Note:
If you have forgotten your PIN code, please use 9999. This PIN code will always be accepted.
NX14-23.fm Page 17 Monday, September 16, 2002 12:55 PM