43
Checking the battery charge level
To check the battery charge level prior to using a
receiver, follow the procedure below.
Note
Position the unit such that its control panel is facing
up.
Charging the receiver batteries
You can charge the receiver’s built-in battery by
using the SXA-75 Charger as follows.
• Charging 50 batteries at one time
• Rapidly charging up to 17 batteries
Checking the battery charge level
1
Connect the AC power cord.
2
Set the POWER switch to ON.
3
Confirm that the VOL control/power switch of the
receiver is set to off, then insert the receiver into
the BATTERY CHECK pocket.
Note
Insert the receiver into the pocket such that the
infrared receiving lens faces the charger’s
operating panel.
4
Check the battery charge level from the
BATTERY CHECK indicators.
The BATTERY CHECK indicators light
according to the battery charge level.
LOW: The charge is less than 35 %.
MED: The charge is between 36 % and 84 %.
HIGH: The charge is more than 85 %.
Battery charging
1
Connect the AC power cord.
2
Check that the VOL control/power switch of the
receiver is set to off and insert the receiver into
the charge pocket until it stops.
Note
Insert the receiver into the pocket such that the
infrared receiving lens faces the charger’s
operating panel.
3
Set the POWER switch of the charger to ON.
The OPERATION indicators light (in green) and
charging starts.
AC outlet
Charger
Receiver
Charger
1
2
3
4
1
2
3
CHARGE TIMER indicators
OPERATION indicators
