37
4
Boosting charge pocket identifier
Some pockets are capable of high-speed charging.
These pockets are marked with a black circle. There
are 17 pockets with this feature. To charge 17 or
fewer batteries, insert the receivers into these pockets.
Charging takes about 2 hours.
5
POWER switch
Turns the power on or off.
6
POWER indicator
Lights when the power is turned on.
7
AC IN (AC power input) connector
Connect to an AC outlet using the supplied AC power
cord.
8
CHARGE TIMER indicators
Indicate the elapsed charging time. The indicators
light in green, one by one, every hour. All five
indicators will be lit 5 hours after charging starts.
After 5 hours, the red FLOAT indicator also lights.
9
OPERATION indicators
Light (in green) when charging has been completed
successfully. The unit features 17 charge control
circuits to control the 50 charge pockets. All 17
OPERATION indicators light when these charge
control circuits are charging the batteries correctly.
The indicator numbers correspond to the pocket
numbers.
0
BATTERY CHECK indicators
Indicate the battery charge. If you insert a receiver to
check its battery’s charge, the indicators light
according to the current charge.
LOW (red): The charge is less than 35%. The battery
must be charged.
MED (green): The charge is 36% to 84%. You can
use the receiver for about 5 hours.
HIGH (green): The charge is more than 85%. It is
not necessary to charge the receiver’s battery.
qa
BATTERY CHECK pocket
Used to check the charge of a receiver before use or
after charging its battery. Insert the receiver whose
battery charge you want to check.
Note
Insert the receiver into the pocket such that the
infrared receiving lens faces the charger’s operating
panel.
