Sony STR-DA2100ES Operating Instructions for STRDA2100ES Скачать руководство пользователя страница 62

Страница: 62 / 68

masterpage:Left

lename[E:\SEM_Janet\Revision

Data\J9050000_2580805131DA2100ES_US\2580805131\US09ADD_STR-DA2100ES-U.fm]

model name1[STR-DA2100ES]

[2-580-805-

(1)]

There is no sound or only a very low-level
sound is heard from the center/surround/
surround back speakers.

• Select a CINEMA STUDIO EX mode (page 31).

• Adjust the speaker level (page 21).

• Make sure the center/surround speakers size

parameter are set to either “SMALL” or
“LARGE” (page 19).

• Make sure the surround back speakers selection

parameter is set to either “DUAL” or “SINGLE”.

There is no sound from the sub woofer.

• Check that the sub woofer is connected correctly

and securely.

• Make sure the sub woofer selection parameter is

set to “YES” (page 19).

• There is no sound output from the SUB WOOFER

depending on the sound field.

The surround effect cannot be obtained.

• Make sure the sound field function is on (press

MOVIE or MUSIC).

• Sound fields do not function for the signals with a

sampling frequency of more than 48 kHz.

Dolby Digital or DTS multi channel sound is
not reproduced.

• Check that the playing DVD, etc. is recorded in

Dolby Digital or DTS format.

• When connecting the DVD player, etc. to the

digital input jacks of this receiver, check the audio
setting (settings for the audio output) of the
connected component.

Recording cannot be done.

• Check that the components are connected

correctly.

• Select the source component with INPUT

SELECTOR.

• Make sure that INPUT MODE is set to

“ANALOG FIXED” (page 36) before recording
from a digital component connected to the analog
MD/TAPE jacks.

• Make sure that INPUT MODE is set to “COAX

FIXED” or “OPT FIXED” (page 36) before
recording from a digital component connected to
the DIGITAL OPTICAL MD/TAPE OUT jack.

The FM reception is poor.

• Use a 75-ohm coaxial cable (not supplied) to

connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.

Radio stations cannot be tuned in.

• Check that the antennas are connected securely.

Adjust the antennas and connect an external
antenna if necessary.

• The signal strength of the stations is too weak

(when tuning in with automatic tuning). Use direct
tuning.

• Make sure you set the tuning interval correctly

(when tuning in AM stations with direct tuning).

• No stations have been preset or the preset stations

have been cleared (when tuning by scanning
preset stations). Preset the stations (page 25).

• Press DISPLAY repeatedly so that the frequency

appears in the display.

There is no picture or an unclear picture
appears on the TV screen or monitor.

• Select the appropriate input on the receiver.

• Set your TV to the appropriate input mode.

• Move your TV away from the audio components.

The DIGITAL OPTICAL MD/TAPE OUT jack
flashes red.

• When “AUTO 2CH” is selected for INPUT

MODE, the jack flashes red when no digital audio
signal is input. This depends on the INPUT
MODE function, and is not a malfunction.

ANTENNA

Receiver

To ground

Ground wire
(not supplied)

Outdoor FM antenna

US01COV_STR-DA2100ES-U.book Page 62 Wednesday, July 13, 2005 2:17 PM

Содержание STR-DA2100ES Operating Instructions for STRDA2100ES





































































Результаты поиска

Содержание STR-DA2100ES Operating Instructions for STRDA2100ES

Отзывы:

Похожие инструкции для STR-DA2100ES Operating Instructions for STRDA2100ES

Бренды по названию

Популярные бренды

Sony STR-DA2100ES Operating Instructions for STRDA2100ES, Руководство по эксплуатации

Результаты поиска

Содержание STR-DA2100ES Operating Instructions for STRDA2100ES

Отзывы:

Похожие инструкции для STR-DA2100ES Operating Instructions for STRDA2100ES

Бренды по названию

Популярные бренды