Sony SRX-R515P, Руководство по установке

Страница: 97 / 146

5-47 (E)
SRX-R515P
5-13-2. Registration of UPS
When this server and uninterruptible power systems (UPS) are connected using a USB cable, the system
can be safely shut down by detecting the resulting error in case that the power supply from UPS stops. To
use this function, it is necessary to register the type of UPS to be connected. The ini file (text file in
which initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in this server
must be changed to register the type of UPS. Refer to section 5-13-1 for the change in an ini file.
1. Enter the “ini” file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the line below.
When UPS is not connected using the USB cable, do not add the line.
com.sony.dcinema.upsMgr.impl.UPSManager.upsClassPath= com.sony.dcinema.upsMgr.impl.Apcupsd
Add the bold-faced portion as described below according to the type of UPS to be used.
.
When using UPS made by APC: com.sony.dcinema.upsMgr.impl.Apcupsd
.
When using UPS made by TrippLite: com.sony.dcinema.upsMgr.impl.TrippLited
3. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)
5-13-3. Registration of Audio Processor
When this server and an audio processor are connected using RS-232C or a LAN cable, the volume can
be controlled and muted from this unit to the audio processor. To use this function, it is necessary to set
the type of the audio processor to be connected and the connection method. The ini file (text file in which
initialization is described and whose file name is SMSMgrServer_Custom.ini) saved in this server must
be changed to set the type of an audio processor and the connection method. Refer to Section 5-13-1 for
the change in an ini file.
1. Enter the “ini” file edit mode. (Refer to steps 1 to 5 in Section 5-13-1.)
2. Add the line below.
When audio processor is not connected, do not add the line.
com.sony.dcinema.serial.impl.AudioDeviceManagerImpl.audioProcessorClassPath= DCP300Control
Add the bold-faced portion as described below according to the type of the audio processor to be
connected.
.
When using DCP300: DCP300Control
.
When using CP650: CP650Control
.
When using CP750: CP750Control
3. Add the line below.
When CP750 is not used, do not add the line.
com.sony.dcinema.serial.impl.CP750Control.connection= Serial
Add the bold-faced portion as described below according to the connection method.
.
When using CP750 and connecting it using an RS-232C cable: Serial
.
When using CP750 and connecting it using a LAN cable: Ethernet
.
When connecting CP750 using a LAN cable: The IP address of CP750 is
registered. (Refer to Section 5-11.)
4. Save the changed contents and end the registration. (Refer to steps 6 to 8 in Section 5-13-1.)