Sony SRX-R515P, Руководство по установке

Страница: 75 / 146

5-25 (E)
SRX-R515P
5-8. Image Adjustment (3D Lens)
The optical axis adjustment, zoom adjustment, focus adjustment, position adjustment, brightness adjust-
ment and registration and calling of adjustment/setting data (FUNCTION MEMORY function) are de-
scribed here.
Before performing the 3D lens image adjustment
Perform any of the following operations to call the function memory. (For the calling procedure, refer to
Section 5-8-11.)
.
Call the free function memory. (Create a new adjustment data.)
.
Call the function memory in which the 3D lens adjustment data is stored. (Create a new adjustment data
using the existing data in function memory.)
n
If the 3D lens function memory is called despite that the 3D lens is installed, the adjustment cannot be
performed correctly.
.
In the case that the function memory is full, call the function memory that can be deleted and tap
[Clear]
.
In any case, register (store) the setting data in the function memory after the adjustment. (For the registra-
tion procedure, refer to Section 5-8-10.)
5-8-1. Optical Axis Adjustment
The optical axis in the 3D lens is adjusted so that the image for the left eye is projected from the lower
lens and the image for the right eye is projected from the upper lens.
1. Tap the “Configuration” tab.
2. Tap
[Projector|$3D%]
→
[Set|Function]
.
The Set Function screen is displayed.
Screen example
[Projector|$3D%]
Test Pattern pane
[Set|Function]