Sony SRX-R320, Руководство по установке

Страница: 75 / 126

2-29
SRX-R320
In the case of the V shift amount is less than 1/2 screen (0 to 1/2 screen)
Flat adjustment
1. Start the SRX Controller. (Refer to Section 2-1-3.)
2. Click the “FUNCTION MEMORY” tab.
The FUNCTION MEMORY window is displayed.
3. Click the
[SELECT]
button.
n
For creation of the new function memory and for details of the function memory, refer to Section 2-7.
4. Call the FUNCTION MEMORY No. for performing the Flat setting using the
[RECALL]
button.
5. Adjust the image size, focus and image position using the zoom, focus and V shift in the “LENS
CONTROL” menu.
n
Adjust the deviation in the horizontal direction by moving the main unit. (Do not use the H shift.)
6. Fix this unit using the four adjusters and lock it with the nuts. (Refer to Section 1-2.)
n
Adjust the height with the V shift.
(Do not use the electric V shift.)
(Refer to “2. FUNCTION MEMORY window” in Section 2-8-3.)
7. Click the “MAINTENANCE” tab.
The MAINTENANCE window is displayed.
8. Adjust the luminance using the required test pattern in the “TEST PATTERN” menu.
9. Click the “FUNCTION MEMORY” tab.
The FUNCTION MEMORY window is displayed.
10. Set the masking in the “MASKING ADJUST” menu.
(Refer to “2.-  MASKING ADJUST” in Section 2-8-3.)
11. Click the
[SELECT]
button.
12. Check the FUNCTION MEMORY No., and then click the
[APPLY]
button. (Memory of Function)
Scope adjustment
1. Start the SRX Controller. (Refer to Section 2-1-3.)
2. Click the “FUNCTION MEMORY” tab.
The FUNCTION MEMORY window is displayed.
3. Click the
[SELECT]
button.
n
For creation of the new function memory and for details of the function memory, refer to Section 2-7.
4. Call the FUNCTION MEMORY No. for performing the Scope setting using the
[RECALL]
button.
5. Adjust the image size, focus and image position using the zoom and focus in the “LENS CONTROL”
menu and the electric V shift in the “ELECTRIC V SHIFT FUNCTION” menu.
(Refer to “2. FUNCTION MEMORY window” in Section 2-8-3.)
6. Click the “MAINTENANCE” tab.
The MAINTENANCE window is displayed.
7. Adjust the luminance using the required test pattern in the “TEST PATTERN” menu.
8. Click the “FUNCTION MEMORY” tab.
The FUNCTION MEMORY window is displayed.
9. Set the masking in the “MASKING ADJUST” menu.
(Refer to “2.-

MASKING ADJUST” in Section 2-8-3.)
10. Click the
[SELECT]
button.
11. Check the FUNCTION MEMORY No., and then click the
[APPLY]
button. (Memory of Function)