Sony SRX-R320, Руководство по установке

Страница: 63 / 126

2-17
SRX-R320
Portion A
Portion B
 Adjusts the left and right of the white image by
parallel movement.
 Adjusts the top and bottom of the white image by
rotational movement.


Fig. 2-4-1f
12. Set Lamp Power to 50% immediately after the lamp is
lit.
13. Project the white image on the screen using “Test
Mode 1” in the “TEST PATTERN” menu on the
MAINTENANCE window.
n
If it is dif fi cult to observe the left, right, top and bot-
tom edges of the white image because it is interrupted
by the black curtain and so on, reduce the white image
size using the zoom so that its edges can be viewed
clearly. Adjust the zoom in “LENS CONTROL” on the
FUNCTION MEMORY window. In the case of out-of-
focus, adjust it in the same way.
(Refer to “2. FUNCTION MEMORY window” in
“2-8-3. Functions of Each Window”.)
14. Perform steps 15 to 17 immediately after step 13 is
fi nished.
15. Observe the left, right, top and bottom edges of the
screen precisely.
16. Check the deviation of illumination range (colored area
around the white image). If there is an area colored by
cyan, loosen the adjusting plate
fi xing screws of por-
tion A in the illustration, and tighten them after adjust-
ment.
17. If there is an area colored by magenta/yellow, loosen
the adjusting plate fi xing screws of portion B in the
illustration, and tighten them after adjustment.
2-4-2. Registration Adjustment
Perform adjustment referring to “4. MAINTENANCE window” in “2-8-3. Function of Each Window” if
registration is out of position.