SRS-RA5000
62
Sony CONFIDENTIAL
For Authorized Servicer
4-4. Speaker switching
It can check the output of each speaker.
Procedure:
1. Before entering the test mode, switch to the function (AUDIO
IN, Wi-Fi, BLUETOOTH) you want to playback and put the
sound source in the playback state.
2. Set the SWAP mode to output speakers to all channels.
Touch the buttons in the following order to switch to SWAP
mode (swap full 1 mode).
[
u
] button 5 times
→
[
] button 5 times
→
[+] button 5 times
The speaker output will switch to SWAP mode (swap full 1),
and the [
1
PAIRING] indicator, [ ] indicator, [AUDIO IN]
indicator, and [ ] indicator will
fl
ashes twice.
Note 1:
If the input function set in step 1 changes due to button operation,
return it.
– Rear view –
1
Touch 5 times.
3
Touch 5 times.
2
Touch 5 times.
Flashes twice
3. Enter the test mode.
(Refer to “1. SETTING THE TEST MODE” on page 60)
4. Touch the [+]/[–] buttons to select the “Speaker switching”
mode, and touch the [
u
] button to execute.
(Refer to “3. CONFIGURATION OF THE TEST MODE” on
page 60)
5. Indicators other than the Reaction indicator will light up, and
sound is output from all speakers.
6. In step 5 state, touch the [+]/[–] (forward/reverse) buttons, the
speaker output will switch in the following order.
Speaker output mode
Indicator (light up)
1
P
AIRING
(Music service)
AUDIO IN
(BLUET
OOTH)
LINK
Sound mode
Reaction
All speakers
Full range (for Top left)
Full range (for Top right)
Full range (for Top center)
Full range (for Side left)
Full range (for Side right)
Full range (for Side center)
Subwoofer
Top center/Side center
Top right/Side right
Top left/Side left
– Continued on upper right –
– Rear view –
– Bottom view –
Reaction indicator
Switching speaker
output mode
[
1
PAIRING] indicator
[ ] (Music service) indicator
[AUDIO IN] indicator
[ ] (BLUETOOTH) indicator
LINK indicator
Sound mode indicator
Speaker position
– Rear view –
Full range
(for Top right)
Full range
(for Side right)
Full range
(for Top left)
Full range
(for Side left)
Subwoofer
Full range
(for Top center)
Full range
(for Side center)
7. After checking, stop the audio signal and release the test mode.
(Refer to “2. RELEASING THE TEST MODE” on page 60)
Note 2:
SWAP mode must be de
fi
nitely released.
By releasing the test mode, the SWAP mode is also released
at the same time, but for con
fi
rmation, be sure to playback the
sound source in the normal mode after releasing the test mode,
and check that the audio output is in the normal state.
If SWAP mode is not released, please perform initialization.
(Refer to “INITIALIZATION METHOD” on page 14)
4-5. BLUETOOTH on/off switching
This item is not used in the servicing.
If you have executed this mode by mistake, touch and hold the [
u
]
button to return to the test item selection status.
4-6. Wi-Fi on/off switching
This item is not used in the servicing.
If you have executed this mode by mistake, touch and hold the [
u
]
button to return to the test item selection status.
4-7. NFC check
This item is not used in the servicing.
If you have executed this mode by mistake, touch and hold the [
u
]
button to return to the test item selection status.
SYS SET
2021/01/20 22:17:49 (GMT+09:00)
