SRS-RA5000
15
Sony CONFIDENTIAL
For Authorized Servicer
NOTICE OF MAC ADDRESS CHANGE TO CUSTOMERS
When replaced the MAIN-AMP board with a new board, the MAC
address will change. Print the following explanations, and pass it
to the customer with the repaired unit when returning the customer
repaired unit.
Note of the MAC address change:
The MAC address of this unit was changed along with this repair.
Please set it again if you are using the MAC address
fi
ltering function
of access point device of connection destination.
MAC address can be con
fi
rmed using the “Google Home” application.
MAC ADDRESS CHECKING METHOD
To check the MAC address of the wireless speaker, refer to the fol-
lowing.
Note 1:
If you are connected to a Wi-Fi network, be sure to initialize the
wireless speaker by referring to “INITIALIZATION METHOD”
on page 14 after completing the work.
Note 2:
When replaced the MAIN-AMP board with a new board, the MAC
address will change. Be sure to refer to “NOTICE OF MAC AD-
DRESS CHANGE TO CUSTOMERS” on the left after the work
is completed, and inform the customer that the MAC address has
changed in the before repair and the after repair.
Advance preparation:
This wireless speaker uses the “Google Home” application to dis-
play the MAC address.
Prepare a smartphone with the “Google Home” application installed
in advance.
Note 3:
In order to use the “Google Home” application, you need to create
a Google account and log in.
Checking procedure:
Note 4:
The screen display of the application on this page are all refer-
ence examples. It may differ from the actual screen display.
1. Make Wi-Fi connection by referring to “Connection procedure
using Google Home” on page 10.
2. Tap the registered speaker.
3. Tap the “ ” icon at the top right of the screen below to open the
device settings screen.
4. Scroll the device settings screen and check the MAC address.
scroll
MAC address
5. After checking the MAC address, disconnect and initialize the
wireless speaker.
Note 5:
Be sure to initialize the wireless speaker by referring to “INITIAL-
IZATION METHOD” on page 14.
SYS SET
2021/01/20 22:17:49 (GMT+09:00)
