SRS-RA5000
60
Sony CONFIDENTIAL
For Authorized Servicer
SECTION 3
TEST MODE
1. SETTING THE TEST MODE
Setting method:
1. Touch the [
1
PAIRING] button to turn on the power.
– Rear view –
2. Touch the [
1
PAIRING] button, [
] button, and [
u
] button
at the same time for more than 4 seconds.
– Rear view –
Touch the 3 buttons at
the same time for more
than 4 seconds.
3. Enter the test mode, and the “All LEDs light up” mode is se-
lected state.
(Refer to “3. CONFIGURATION OF THE TEST MODE” on
the right)
2. RELEASING THE TEST MODE
Releasing method:
1. Touch the [
1
PAIRING] button, [
] button, and [
u
] button
at the same time for more than 4 seconds.
– Rear view –
Touch the 3 buttons at
the same time for more
than 4 seconds.
2. After this unit is rebooted, the test mode is released and it will be
in the standby state.
– Rear view –
Indicators
all light off.
Standby state.
Flashes (reboot)
3. CONFIGURATION OF THE TEST MODE
The corresponding indicator to the selected test item light up/
fl
ash-
es. Refer to the following.
Indicator position:
– Rear view –
– Bottom view –
[
1
PAIRING] indicator
[ ] (Music service) indicator
[AUDIO IN] indicator
[ ] (BLUETOOTH) indicator
Reaction indicator
Sound mode indicator
LINK indicator
Button input setting:
[+]/[–]
: Selection (forward/reverse) of test item
[
u
] touch
: Execute selected test item
[
u
] touch and hold : From the running test item, return to the se-
lected state
Test item list and light up/
fl
ashes of indicator:
Test item
Indicator (light up/
fl
ashes)
1
P
AIRING
(Music service)
AUDIO IN
(BLUET
OOTH)
LINK
Sound mode
Reaction
All LEDs light up
Key check
Volume switching (Not use)
Speaker switching
BLUETOOTH on/off switch-
ing (Not use)
Wi-Fi on/off switching
(Not use)
NFC check (Not use)
Unique information setting/
check
Firmware version display
USB Update
: Light up
: Flashes
SYS SET
2021/01/20 22:17:49 (GMT+09:00)
