SRS-RA5000
11
Sony CONFIDENTIAL
For Authorized Servicer
Note 7:
The screen display of the application on this page are all refer-
ence examples. It may differ from the actual screen display.
10. When device detection start and the wireless speaker (SRS-
RA5000) is detected, tap “Yes”.
check
11. The connection with the wireless speaker is started, and when
the connection is completed, sound is output from the wireless
speaker.
When you hear the output sound, tap “Yes”.
12. When the following screen is displayed, tap the “No thanks”.
– Continued on upper right –
13. Select the location where you want to use the wireless speaker
and tap “Next”.
Note 8:
There is no problem in selecting an any location instead of the ac-
tual location.
Select any
location.
14. The Wi-Fi (SSID) to which the wireless speaker is connected
is displayed. Select the same SSID as your smartphone and tap
“Next”.
Note 9:
It will take some time for the Wi-Fi (SSID) to be displayed.
Select the same SSID
as your smartphone.
15. When tap “OK”, the Wi-Fi (SSID) password used on the smart-
phone is automatically acquired and the connection is started.
Note 10:
If you connected with the same Wi-Fi (SSID) in the past and the
password was saved in Google Home, the connection will start
automatically.
16. When the connection is completed and the following screen is
displayed, tap “Not now”.
– Continued on next page –
SYS SET
2021/01/20 22:17:49 (GMT+09:00)
