Sony SNC-EMX30, Руководство пользователя

Страница: 71 / 275

72 en | Configuration Network camera
2019-07 | V01 | DOC User manual Sony Corporation
Notice!
Do not use HDR with 50/60 Hz fluorescent or pulse width modulated LED lighting
HDR can only be active if Auto exposure is selected, and there is a match between the base
frame rate (selected in the installer menu) and the ALC fluorescent mode frequency. If there
is a conflict, a pop-up window will suggest a solution and adjust the appropriate settings.
Backlight compensation
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely bright-dark conditions.
Select Intelligent AE to capture object detail in scenes with people moving in front of a bright
background
Contrast enhancement
Select On to increase the contrast in low contrast conditions.
Intelligent Defog
Select this to activate the automatic intelligent defog feature. This feature continuously
adjusts image parameters to provide the best picture possible under foggy or misty
conditions.
Sharpness level
The slider adjusts the sharpness level between -15 and +15. Zero position of the slider
corresponds to the factory default level.
A low (negative) value makes the picture less sharp. Increasing sharpness brings out more
detail. Extra sharpness can enhance the details of license plates, facial features and the edges
of certain surfaces but can increase bandwidth requirements.
Intelligent Dynamic Noise Reduction
Select On to activate intelligent Dynamic Noise Reduction (DNR) which reduces noise based
on motion and light levels.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15. The higher the value, the
more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level between -15 and +15. The higher the value, the more
noise filtering.
Intelligent streaming
(Only applicable to SNC-EMX cameras)
The sharpness level, Temporal noise filtering and Spatial noise filtering can be automatically
adjusted here, through the encoder, for optimum intelligent streaming results.
Dynamic sharpness & noise filtering
Enable or disable the automatic adjustment of the encoder.
Priority encoder stream
Select stream 1, 2 or smart select as the priority stream for the encoder. The smart select
automatically selects the optimum stream.
4.3.6 Scene Mode Scheduler
The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
Select the mode you wish to use during the day from Marked range drop-down box.
2. Select the mode you wish to use during the night from Unmarked range drop-down box.
3. Use the two slider buttons to set the Time ranges .