Sony SNC-EMX30, Руководство пользователя

Страница: 55 / 275

56 en | Operation via the browser Network camera
2019-07 | V01 | DOC User manual Sony Corporation
Watermark invalid
Indicates that the watermark is not valid.
Motion alarm
Indicates that a motion alarm has occurred.
Storage discovery
Indicates that recorded video is being retrieved.
3.2 Playback page
Click Playback in the application bar to view, search or export recordings. This link is only
visible when a memory card is configured for recording (with Video Recording Manager (VRM)
recording this option is not active).
On the left side of the screen, there are four groups:
–
Connection
– Search
– Export
– Track list
3.2.1 Selecting the recording stream
On the left side of the browser, expand the Connection group if necessary.
To view a video channel:
1.
Select the Video option. If Dewarped view mode or E-PTZ are set, the Dewarping drop-
down list is set to E-PTZ and cannot be changed. Dewarped video options are only
applicable to SNC-HMX cameras .
2. Select the Dewarping option.
3. Select Recording stream 1 or 2.
3.2.2 Searching for recorded video
On the left side of the browser, expand the Search group if necessary.
1. To limit the search to a particular time range, enter the date and times for the start and
stop points.
2. Select an option from the drop-down box to define a search parameter.
3. Click Search .
4. The results are shown.
5. Click a result to play it back.
6. Click Back to define a new search.
3.2.3 Exporting recorded video
On the left side of the browser, expand the Export group if necessary.
1. Select a track in the track list or in the search results (or click on the timeline below the
video window and drag the buttons to mark the sequence you want to export).
2. The start and stop date and time are filled-in for the selected track. If required, change
the times.
3. In the Time lapse drop-down box, select the original or a condensed speed.
4. In the Location drop-down box, select a target.
5. Click Export to save the video track.
Note:
The target server address is set on the Network / Accounts page.