Sony SNC-EMX30, Руководство пользователя

Страница: 52 / 275

Network camera Operation via the browser | en 53
Sony Corporation User manual 2019-07 | V01 | DOC
3 Operation via the browser
3.1 Live page
After the connection is established, the Live page is initially displayed. It shows the live video
image on the right of the browser window. Depending on the configuration, various text
overlays may be visible on the live video image.
Other information may also be shown next to the live video image. The items shown depend
on the settings on the
'Live' functions page.
Connection
In the Connection group, there are three options: Video , Dewarping and Stream .
Video
(Only applicable to SNC-HMX cameras)
If the application variant is set to DEWARP , you can select one of the three available video
channels for viewing:
1.
On the left side of the browser, expand the Connection group if necessary.
2. Click Video to see the options.
– By default these are named Full Image Circle (video 1), Dewarped view mode
(video 2), and E-PTZ (video 3). These names can be changed in the Configuration >>
General >> Identification menu.
3. Select the video channel you wish to view.
If Dewarped view mode or E-PTZ are selected, the Dewarping drop-down list is set to E-PTZ
and cannot be changed.
Dewarping
(Only applicable to SNC-HMX cameras)
In the Dewarping drop-down list, select one of the options:
– Off
– E-PTZ
– Panoramic : One panoramic image is shown.
– Double panoramic : Two independent panoramic images are shown. They can be adjusted
independently on the Live preview.
– Corridor : Two independent corridor images are shown. They can be adjusted
independently on the Live preview.
– Quad : Four independent panoramic images are shown. They can be adjusted
independently on the Live preview.
Image selection
To view a live stream:
1.
On the left side of the browser, expand the Connection group if necessary.
2. Click the Stream drop-down arrow to see the options.
3. Select the stream you wish to view.
ROI
(Only applicable to SNC-HMX cameras)
If the Application variant is set to DEWARPED , the ROI group is available.
When the Dewarping drop-down list is set to E-PTZ or Panoramic , the ROI group can be used.
With a dewarped or E-PTZ view, a Region Of Interest (ROI) can be selected.
1.
On the left side of the browser, expand the ROI group if necessary.
2. Use the controls to move around the image.
3. Click + to zoom and – to zoom out.