Sony SLV-T2000AS Скачать руководство пользователя страница 61

Страница: 61 / 76

Editing

PAUSE

REC

INPUT SELECT

STOP

Editing with another VCR (continued)

Tips

• Make sure you connect the plugs to jacks of the same colour.
• If the other VCR is a monaural type, leave the red plug unconnected.
• When connection is made using the EURO-AV connector, if the other VCR doesn’t

have a EURO-AV (Scart) connector, use the VMC-2106 EURO-AV connecting cable.

• When recording on this VCR, you can connect the other VCR into LINE-1 (TV)

using LINE IN jack of the 21-pin adaptor. In this case, press INPUT SELECT to
display “L1” in the display window.

Operation (when recording on this VCR)

Befor e you star t editing

• Press INPUT SELECT to display “L2” in the display window.
• Press TAPE SPEED to select the recording tape speed (SP/LP) (VHS deck

only).

• If the other (playback) VCR has an EDIT function, set it to ON.

Insert the source tape into the other (playback) VCR. Search for the
point to start playback and set it to playback pause.

Insert a tape for recording into this (recording) VCR. Search for the
point to start recording and press

PAUSE.

The VCR enters playback pause mode.

Press

REC on this VCR to set it to recording pause.

To start editing, press the

PAUSE buttons on both VCRs to release the

VCRs from pause.

For best results, press the pause on the playback VCR just before
pressing

PAUSE button on this VCR.

TAPE SPEED
SP/LP (VHS)

Содержание SLV-T2000AS













































































Результаты поиска

Содержание SLV-T2000AS

Отзывы:

Sony SLV-T2000AS, Руководство по эксплуатации, Страница: 61 / 76

Результаты поиска

Содержание SLV-T2000AS

Отзывы: