Sony SLV-T2000AS, Руководство по эксплуатации, Страница: 38 / 76

Basic Operations
Basic Operations
37
To stop r ecor ding
To stop the VCR while recording, press TIMER REC ON/OFF.
To recor d satellite br oadcasts
If you connect a satellite tuner and the VCR, you can record satellite
programmes.
1
Turn on the satellite tuner.
2
On the satellite tuner, select the satellite programme for which you wish
to make a timer setting.
3
Repeat the steps described above.
4
Keep the satellite tuner turned on until the VCR finishes recording the
satellite programme for which you have made a timer setting.
To use the VCR after setting the timer
To use the VCR before a timer recording begins, just press TIMER REC ON/
OFF. The TIMER REC indicator turns off and press
u
to turn on the VCR.
Remember to press TIMER REC ON/OFF to reset the VCR after using the
VCR.
You can also do the following tasks while the VCR is recording:
• Reset the counter.
• Display tape information on the TV screen.
• Check the timer settings.
• Watch another TV programme.
Tip
• To cancel the procedure, press G-CODE before pressing SET.
Notes
• If the VCR beeps repeatedly, this means that:
– The G-CODE number is incorrect.
– ONCE, DAILY, or WEEKLY was selected incorrectly. You cannot select DAILY or
WEEKLY for a programme that airs more than seven days ahead.
• You cannot set the timer recording on both the 8 mm deck and VHS deck, since you
have to select the deck before you make the setting. If one deck has been already
standing by for timer recording, select that deck for timer recording.
• While one deck is standing by for timer recording or proceeding timer recording,
another deck can only play back a recorded tape and record the line input source.