Sony SLV-T2000AS Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 76

Sony SLV-T2000AS Скачать руководство пользователя страница 55

Editing

54

One button dubbing

One button dubbing is a way of editing
the entire tape contents to another tape
automatically from one deck to the
other.

Befor e you star t editing

• Turn on your TV and set it to the

video channel.

1

Insert a source tape into one deck and a tape for recording into the
other deck.

2

Press Video8

÷

or VHS to select the editing direction.

“Video8

÷

” means that the recording is made from the 8 mm tape to

the VHS tape.

“ VHS” means that the recording is made from the VHS to the 8 mm
tape.

3

Press SP/LP (VHS) button to select TAPE SPEED of the VHS tape when
you record from the 8mm tape to the VHS tape.

When you record from the VHS tape to the 8 mm tape, skip this step.

4

Press DUBBING.

The VCR rewinds both tapes to the beginning, and starts dubbing
automatically. When either tape reaches the end, the VCR rewinds both
tapes to the beginning, and ejects them. And then, the power turns off
automatically.

To stop editing

Press the

p

STOP button.

Notes

• When editing from VHS tape to 8 mm tape, note the following:

- If editing is proceeding with a VHS tape that you have recorded, the tape may be

automatically ejected. In this case, check the safety tab. If the tab is removed,
cover the tab hole with adhesive tape and after recording, remove the tape to
protect the recording. Make sure of the direction for recording so that you won’t
accidentally erase an important recording.

- If the safety switch on the 8 mm tape to be used as an original tape is slid out so

that the red portion is visible, the tape is automatically ejected. In this case, slide
the switch back in place so that the red portion is not visible. Make sure of the
direction for recording.

• Noise may appear at the beginning part of the edited tape.
• If the playback deck play blank for 5 minutes, both decks automatically stop,

rewind tapes to the beginning, and eject them. And then, the power turns off
automatically.

Video8

÷

VHS

Editing

DUBBING

SP/LP (VHS)

«
...
53
54
55
56
57
...
»

Содержание SLV-T2000AS













































































Отзывы:

Нет отзывов