Sony SLV-T2000AS Скачать руководство пользователя страница 56

Страница: 56 / 76

Editing

Cut editing

You can edit VCR recording from one
deck to the other with cutting your
unwanted event.

Befor e you star t editing

• Turn on your TV and set it to the

video channel.

Insert a source tape into one deck and a tape for recording into the
other deck.

Locate the recording start point by rewinding or fast-forwarding.

Press Video8 or VHS to select the recording deck.

When you select VHS, press SP/LP (VHS) button to select TAPE SPEED
of the VHS tape.

Press EDIT ON (DIR)/OFF to select the editing direction.

Each pressing of the button changes as follows:

“Video8

VHS” means that the recording is made from the 8 mm

tape to the VHS tape.

“Video8 VHS” means that the recording is made from the VHS to
the 8 mm tape.

Press EDIT STANDBY/START.

The playback deck enters the playback pause mode and the recording
deck enters the recording pause mode. The indicator above the button
flashes.

Press EDIT STANDBY/START again.

Both decks release the pause and starts editing. The indicator above the
button lights.

Press EDIT STANDBY/START at the beginning of the unwanted event.

Both decks enter the pause mode. The indicator above the button
flashes.

continued

Video8

VHS

EDIT ON(DIR) /OFF

EDIT STANDBY/START

EDIT STOP

CLICK SHUTTLE
ring

SP/LP
(VHS)

Содержание SLV-T2000AS













































































Результаты поиска

Содержание SLV-T2000AS

Отзывы:

Sony SLV-T2000AS, Руководство по эксплуатации, Страница: 56 / 76

Результаты поиска

Содержание SLV-T2000AS

Отзывы: