5-48
SEL1655G
(8) ROM CHECK
• Check the data stored on the Main Board.
Subject
Not required
Operation on Lens side
Not required
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Click the [ROM CHECK] button in the Adjustment and Inspec-
tion.
2. Data check is performed, and the check result is displayed in the
message area.
[]
.
[]
.
[]
.
[]
Result of
data check
(9) SLEEP
• Set the switch to initial position.
• Perform final check.
Subject
Not required
Operation on Lens side
• Focus mode switch
• Zooming ring
Shooting Mode of the camera P mode (Program Auto)
Checking Method
1. Set the switch position of the lens as follows.
• Focus mode switch
: AF
• Zooming ring
: WIDE end
2. Click the [SLEEP] button in the Adjustment and Inspection.
3. “SW POSITION CHECK OK” is displayed, press the ENTER
key.
4. Perform final check.
5. When the final check is completed, “ [FINAL CHECK OK]”
is displayed in the message area.
(10) Write the serial number
• Write the lens serial number on the Main board.
Subject
Not required
Operation on Lens side
Not required
Shooting Mode of the camera P mode (Program Auto)
Note 1:
Perform this item when adjustment data can not be read from
the Main board before replacement.
Writing Method
1. Input the serial number of the checking lens in the serial number
input field of Adjustment and Inspection.
Note 2:
Input the serial number with 7 digits.
[]
.
[]
.
[]
.
[]
Serial number
input field
2. Click the [Serial Write] button.
3. When the writing is completed, “ [SERIAL NUMBER Write
OK]” is displayed in the message area.
4. Click the [Lens Data] button.
5. Check that the serial number of the checking lens inputted is
displayed in the serial number display field.
[]
.
[]
.
[]
.
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
[]
Serial number
display field
SYS SET
2020/02/04 22:49:28 (GMT+09:00)
