5-27
SEL1655G
13. When shooting is completed, “CAPTURE OK” is displayed.
Press the ENTER key.
14. Set the resolution check chart to the WIDE end position. (Refer
to “5-3-3. Setting/Preparation of the Resolution Check Chart”)
15. Click the [WIDE START] button on the DF Tool screen to start
shooting at the WIDE end.
[][][][][][][][][][][]
[][][][]
16. Repeat steps 5 to 13 and shoot at the WIDE end.
Note 2:
When shooting at the WIDE end, in step 10, “Check
ZOOM Position -> WIDE” is displayed, set the zooming
ring of the lens to “WIDE end (focal length: 16 mm)”.
(3) Partial Blur Check
Analyze 42 captured image files and check the partial blur.
Checking Procedure
1. Remove the SD card from the camera and capture the 42 image
files to the PC.
2. Click the [TELE START] button on the RACS screen and confirm
that the “<TELE> Drag-and-drop image file(s) here.” is displayed
on the message.
[][][][]
[][][][][][][][][][][]
3. From the 42 image files captured in the PC, select the 21 image
files shot with TELE, and drag & drop to the RACS screen.
[][][][]
[][][][][][][][][][][]
– Continued on next page –
SYS SET
2020/02/04 22:49:28 (GMT+09:00)
