5-47
SEL1655G
(7) IMAGE CHK
• Check that there is no center shifting, image shaking or image
jumping.
Subject
Flange back adjustment jig
+ Siemens star char
Operation on Lens side
• Focus mode switch
• Zooming ring
Shooting Mode of the camera P mode (Program Auto)
Preparation
Attach the siemens star char to the Flange back adjustment jig, and
set the jig as shown in the following figure.
Flange back
adjustment jig
Within 10 mm
Lens to be tested
Note:
The Brightness at the center of siemens star char should be 200
to 400 lux or 35 to 65 cd/m
2
.
Please make the siemens star so that there is no unevenness of
light source.
Checking Method
1. Click the [IMAGE CHK] button in the Adjustment and Inspec-
tion.
2. “PLEASE CHANGE ZOOM TO TELE” is displayed, set the
zooming ring to the TELE end (focal length: 55 mm).
Zooming ring
3. “Confirm the image. IMAGE SWING/JUMP/CENTER CHECK
Start” is displayed, press the ENTER key.
4. Operate the zooming ring and confirm that there is no center
shifting, image shaking or image jumping on the camera monitor.
When the confirmation is complete, press the ENTER key.
5. When the ENTER key is pressed, “IMAGE CHECK OK” is
displayed.
6. When the ENTER key is pressed, releasing from adjustment
mode are performed automatically, and “ [IMAGE CHK
EXECUTION OK]” is displayed in the message area when the
process is completed.
SYS SET
2020/02/04 22:49:28 (GMT+09:00)
