Sony RM-PJM600, Руководство по обслуживанию

Страница: 28 / 106

1-24
S VIDEO VIDEO
INPUT A MOUSE
AUDIO OUT
L-AUDIO-R
AUDIO IN
S VIDEO VIDEO
INPUT A MOUSE
AUDIO OUT
L-AUDIO-R
AUDIO IN
Connecting with a VCR
1) Macintosh is a registered trademark of Apple Computer, Inc.
p Connections p
p Projection Distances p
The distance between the lens and the screen varies depending on the size of the screen. Use the
following table as a guide.
p Basic Operation p
Use the supplied adapter
when connecting with a
Macintosh
1) computer.
VCR
to S video
output
to audio/video
outputs
Audio/video cable (supplied)
S-Video cable (not supplied)
Quick Reference Card
Sony Corporation

1998 Printed in Japan 4-068-675-11 (1)
(m (feet))
Distance
Connecting with a computer
SMF-401
HD D-sub 15-pin cable (supplied)
to mouse/serial port
to audio out
to monitor out
Stereo audio connecting cable
(not supplied)
Right side
1
After all equipment is connected completely, plug the AC power cord into the wall outlet.
2
Press the I / u key to turn on the projector.
3
Turn on equipment connected to the projector. Press the INPUT key to select the input source.
4
Turn the focus ring to adjust the focus, and turn the zoom ring to adjust the size of the picture.
To get the clearest picture
You can get the suitable picture when a signal from the computer is input. Press the APA (Auto
Pixel Alignment) key to adjust the picture to be projected clearest.
Screen size (inches) 40 60 80 100 120 150
1.5 2.4 3.2 4.0 4.8 6.0
(5.1) (7.7) (10.4) (13.0) (15.7) (19.7)
1.8 2.8 3.7 4.7 5.6 7.0
(6.0) (9.1) (12.2) (15.3) (18.4) (23.0)
SIC-S20/S22 Mouse cable
(supplied) or SIC-S21 (not supplied)
Use an appropriate mouse
cable according to your
computer.
VPL-XC50U/E/M
Right side
Minimum
Maximum
APA
key
Computer
COMMAND
MUTING
I / u
INPUT
APA
MENU LASER
V
b B
v ENTER
RESET
VOLUME
+
–
R CLICK
PICTURE AUDIO
ON OFF
2
3
2
3
MENU
ENTER RESET
INPUT
ON
/STANDBY
LIGHT
APA
VOLUME I / u
POWER
SAVING
TEMP
/FAN
LAMP
/COVER
1
4
APA
key
p Menu Functions p
PICTURE CTRL menu: Adjusts picture settings.
CONTRAST: Adjusts picture contrast.
BRIGHT: Adjusts picture brightness.
COLOR: Adjusts color intensity.
HUE: Adjusts skin tones.
SHARP: Adjusts picture sharpness.
D. PICTURE: Emphasizes the black color.
GAMMA MODE: Selects a gamma correction curve.
COLOR TEMP: Adjusts the color temperature.
COLOR SYS: Selects color system of the input signal.
INPUT SETTING menu: Adjusts the input signal settings.
DOT PHASE: Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A connectors.
SIZE: Adjusts the horizontal size of pictures input from the INPUT A connectors.
SHIFT: Adjusts the position of the picture input from the INPUT A connectors.
ASPECT: Sets the aspect ratio of the picture.
SCAN CONV: Converts the signal to display the picture according to the screen size or
according to actual pixel resolution.
SET SETTING menu: Changes the projector settings.
STATUS: Selects the on-screen information to be displayed.
INPUT-A: Selects the signal input from the INPUT A connector.
LANGUAGE: Selects the language used in the menu and on-screen displays.
SPEAKER: Cuts off the sound of internal speakers.
POWER SAVING: Switches projector to power saving mode.
SIRCS RECEIVER: Selects the remote control detectors on the front and rear of the projector.
When a video signal is input
When an RGB signal is input
When an RGB signal is input
To Control panel or Remote
Commander key
Select a menu
Use the
V
/
v
keys to select a menu,
then press the ENTER or
b
key.
Select an item
Use the
V
/
v
keys to select an item,
then press the ENTER or
b
key.
Change an Use the V / b keys to increase the
adjustment level number.
Use the
v
/
B
keys to decrease the
number.
Then, press the ENTER key.
Change a setting Use the V / v keys to select the
setting.
Then, press the ENTER or
B
key.
p Basic Menu Operation p
To display the menu, press the MENU key.
When a video signal is input
V I DEO
P I CTURE CTRL
CONTRAST : 8 0
BR I GHT : 5 0
COLOR : 5 0
HUE : 5 0
SHARP : 5 0
D . P I CTURE : OFF
COLOR TEMP : LOW
COLOR SYS : AUTO
I NPUT–A
P I CTURE C TRL
CONTRAST : 8 0
BR I GHT : 5 0
GAMMA MODE : GRAPH I CS
COLOR TEMP : H I GH
V I DEO
I NPUT SETT I NG
ASPECT : 4 : 3
No . 0 1
V I DEO / 6 0
I NPUT–A
I NPUT SETT I NG
DOT PHASE : 5
S I ZE
H : 1 0 5 6
SH I FT H : 2 1 9 V : 1 7
SCAN C ONV : ON
No . 17
8 0 0X6 0 0
I NPUT–A
SET SETT I NG
STAT US : ON
LANGUAGE : ENGL I SH
SPEAKER : ON
POWER SAV I NG : OFF
S I RCS RECE I VER : FRONT&REAR
I NPUT–A : RGB