Sony RM-PJM600, Руководство по обслуживанию

Страница: 19 / 106

1-15
28
(GB)
The INPUT SETTING Menu
DOT PHASE
Adjusts the dot phase of the LCD panel and the signal
input from the INPUT A connector. Adjust the picture
further for finer picture after the picture is adjusted
with pressing the APA key.
Adjust the picture to where it looks clearest.
SIZE
Adjusts the horizontal size of picture input from the
INPUT A connector.
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size of
the picture. Adjust the setting according to the dots of
the input signal. For details on the suitable value for
the preset signals, see page 30 (GB).
SHIFT
Adjusts the position of the picture input from the
INPUT A connector.
H adjusts the horizontal position of the picture.
V adjusts the vertical position of the picture.
As the setting for H increases, the picture moves to the
right, and as the setting decreases, the picture moves to
the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
B
or the
b
key to adjust the horizontal position
and the V and v key for the vertical position.
The INPUT SETTING menu is used to adjust the input
signal.
Unadjustable items depending on the input signal are
not displayed in the menu.
Operation
1. Select an item
Use the
V
or
v
key to select the item, then press the
b
or ENTER key.
2. Adjust an item
• When changing the adjustment level:
To increase the number, press the V or b key.
To decrease the number, press the v or B key.
Press the ENTER key to restore the original screen.
• When changing the setting:
Press the
V
or
v
key to change the setting.
Press the ENTER or B key to restore the original
screen.
When the video signal is input
When the RGB signal is input
Memory No.
Signal type
Memory No.
Signal type
V I DEO
I NPUT SETT I NG
ASPECT : 4 : 3
No . 0 1
V I DEO / 6 0
I NPUT–A
I NPUT SETT I NG
DOT PHASE : 5
S I ZE
H : 1 0 5 6
SH I FT H : 2 1 9 V : 1 7
No . 17
8 0 0X6 0 0
SCAN C ONV : ON
DOT PHASE : 5
S I ZE H : 1 0 5 6
SH I FT H : 2 1 9 V : 1 7
29
(GB)
ASPECT
Sets the aspect ratio of the picture.
When inputting 16:9 (squeezed) signal from
equipment such as a DVD player, set to 16:9.
4:3: When the picture with ratio 4:3 is input.
16:9: When the picture with ratio 16:9 (squeezed) is
input.
SCAN CONV (Scan converter)
Converts the signal to display the picture according to
the screen size.
ON: Displays the picture according to the screen size.
The picture will lose some clarity.
OFF: Displays the picture while matching one pixel
of input picture element to that of the LCD. The
picture will be clear but the picture size will be
smaller.
Note
When the XGA or SXGA signal is input, this item will
not be displayed.
Input signals and adjustable/setting items
Item Input signal
Video or 15k RGB/ RGB B&W
S video (Y/C) Component
DOT PHASE – – –
SIZE – – –
SHIFT – – –
ASPECT –
SCAN CONV – – –
: Adjustable/can be set
– : Not adjustable/can not be set
About the preset memory No.
This projector has 38 kinds of preset data for input
signals for INPUT-A (the preset memory). The
memory number of the current input signal and the
signal type are displayed when the preset signal is
input. This projector automatically detects the signal
type. When the signal is registered to the preset
memory, a suitable picture is displayed on the screen
according to the signal type. You can adjust the picture
through the INPUT SETTING menu.
This projector also has 20 kinds of user memories for
INPUT-A. When an unpreset signal is input for the
first time, memory number is displayed as 00. If the
input signal is adjusted in the INPUT SETTING menu,
the setting via INPUT-A is stored under the memory
number 51 to 70. When more than 20 user memories
are registered for INPUT-A, the newest memory is
automatically stored over the oldest one.
V I DEO
I NPUT SETT I NG
ASPECT : 4 : 3
No .0 1
V I DEO / 6 0
I NPUT–A
I NPUT SETT I NG
DOT PHASE : 7
S I ZE
H : 1 0 5 6
SH I FT H : 3 2 0 V : 2 4
No . 17
8 0 0X6 0 0
SCAN C ONV : ON