Sony RCP-750, Руководство по эксплуатации

Страница: 92 / 149

16(E)
Menu Configuration and Basic Menu Operations
Monitor output set display (Expansion menu)
When you press
[WF/PIX Select]
on an adjustment
display of the Paint menu, the upper half of the panel
becomes the monitor output setting display.
Scene file operation menu display
When you press and light the SCENE button of the
menu operation block, the scene file operation menu
display is obtained.
Press again to return to
the previous display.
R/G/B: To independently select the R,
G, or B signal.
RGB: To select the R, G, and B signals
in combination.
SEQ: Only the WF output is enabled,
and you can monitor the waveforms of
the R, G, and B signals in sequence.
ENC (encode): The encoded signal is
output.
WF/PIX Monitor Select
WF/PIX
Select
R G B RGB SEQ ENC
To store the current settings
in a scene file:
First press and light
[Store] , then select
the desired scene file number.
When file registration is finished,
[Store]
returns to its original color.
To recall a scene file:
Press the number of the desired
scene file, and the settings stored
in the corresponding scene file
will be retrieved.
The color of the number of the
retrieved file changes.
When you press the same
number again, the previous
condition will be restored.
Store
1 2 3 4 5
Scene File Recall