000
7. Menu Display and Settings: Menu List
106
Maintenance >White Filter
Makes settings related to filters.
Item
Setting
Description
Electrical CC<A>
3200K
/4300K/5600K/6300K
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch.
Electrical CC<B>
3200K/
4300K
/5600K/6300K
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch.
Electrical CC<C>
3200K/4300K/
5600K
/6300K/
---
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch. Select “----” if not using C.
Electrical CC<D>
3200K/4300K/5600K/
6300K
/
---
Selects the color temperature when the electrical
CC filter switching function is assigned to an
assignable switch. Select “----” if not using D.
Maintenance >DCC Adjust
Makes settings related to DCC (dynamic contrast control).
Item
Setting
Description
DCC Function Select
DCC
/Fix
Selects the setting method for the knee point
when the OUTPUT/DCC switch is set to CAM with
DCC on.
DCC: Automatically adjusts the knee point to
match the luminance of the subject.
Fix: Sets the knee point to a fixed value.
DCC D Range
400%/450%/500%/550%/
600%
Sets the dynamic range when the OUTPUT/DCC
switch is set to CAM with DCC on.
DCC Point
–99 to
±0
to +99
Sets the DCC minimum knee point.
DCC Gain
–99 to
±0
to +99
Sets the gain relative to the DCC detected value.
DCC Delay Time
–99 to
±0
to +99
Sets the DCC control speed (speed of response to
changes in the video).
DCC Peak Filter
–99 to
±0
to +99
Adjusts the response sensitivity relative to the
peaks in DCC detected values.
Maintenance >Flicker Reduce
Makes settings related to the flicker correction function.
You can correct the flicker created when shooting a subject under lighting where the brightness varies
periodically, such as fluorescent lighting, due to the relationship between the frequency and the recording
frame rate.
Item
Setting
Description
Mode
Auto
/On/Off
Sets the operation of the flicker correction
function.
On: Always operating.
Auto: Operates when flicker is detected.
Off: Does not operate.
Frequency
60Hz/50Hz
The factory setting is 60Hz when System
Frequency is set to 59.94, 29.97, or 23.98.
The factory setting is 50Hz when System
Frequency is set to 50 or 25.
Maintenance >Genlock
Makes settings related to genlock.
Item
Setting
Description
Genlock
On
/Off
Turns the genlock function on/off.
Reference
Internal
/External(HD)/
External(SD)/SDI IN/CA
Displays the type of reference signal used by the
camcorder.
Maintenance >Auto Shading
Executes auto black shading correction.
Item
Setting
Description
Auto Black Shading
Execute/Cancel
Executes auto black shading correction (execute
by selecting Execute).
Reset Black Shading
Execute/Cancel
Clears the black shading correction value (execute
by selecting Execute).
Master Gain (TMP)
–3dB/0dB/3dB/6dB/9dB/12dB/
18dB/24dB/30dB/36dB/42dB
Sets a temporary master gain value. (The value is
the same as the value selected with the GAIN
switch.)
Maintenance >APR
Makes settings related to automatic pixel noise reduction.
Item
Setting
Description
APR
Execute/Cancel
Executes the automatic pixel noise reduction
function to suppress white flecks in SLS mode
(execute by selecting Execute).
Reset
Execute/Cancel
Deletes white flecks data that were added by
execution of the APR and automatic black balance
adjustment functions (execute by selecting
Execute).
