background image

1

INSTRUCTIONS

ENGLISH

LYT1063-001B

AUTOMATIC DEMONSTRATION

Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).

• Available when the Power Switch 

@

 is set to “

” or “

” while pressing down the Lock Button 

!

 located

on the switch.

• Performing any operation during the demonstration stops the demonstration temporarily. If no operation

is performed for more than 1 minute after that, the demonstration will resume.

• “DEMO MODE” remains “ON” even if the camcorder power is turned off.
• To cancel Automatic Demonstration, set the Power Switch 

@

 to “

” and press the MENU Wheel 

1

 in

while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel 

1

 to select “OFF” and press it.

NOTES:

• When a tape whose Erase Protection tab is in the position that allows recording is loaded in the

camcorder, demonstration is not available.

• If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration

activated on the LCD monitor* or viewfinder.

* Applicable models only.

Dear Customer,

Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (

 pg. 3, 4) to ensure safe use of this product.

Printed in Japan
0902-MK-UN-SN

AG/AS/AA

COMPACT VHS CAMCORDER

GR-SXM590

AG/AS

GR-SXM290

AG/AS/AA

GR-SXM190

AG/AS

GR-SX250

AG/AS

GR-SX150

AG/AS

VHS
PAL

625

®Registered Trademark owned by VICTOR COMPANY OF JAPAN, LTD.

COPYRIGHT©  2002 VICTOR COMPANY OF JAPAN, LTD.

 1 GR-SXM590_EN_Japan

02.11.5, 2:09 PM

1

Содержание GR-SXM290AG

































Отзывы: