Sony Pro 10, Руководство пользователя, Страница: 68 / 382

Playing a file from a specified point
You can begin playback from any point in a file.
1.
Click to position the cursor in the data window. A flashing cursor (spanning the height of the waveform display) is displayed.
2.
Click the Play button ( ) on the transport bar. The file plays from the cursor position.
If you do not hear playback, you may have inadvertently created a small selection. To determine if you created a selection, examine
the status boxes in the bottom-right corner of the data window.
Selection status bar
• If only the first box contains a value, there is no selection.
• If all three boxes contain values, a selection has been created. Clear the selection by clicking anywhere in the data window.
For more information, see Viewing selection status on page 63 .
Tip:
When Options > Seek Cursor on Playback is selected, playback will restart when you position the cursor. If you do not want to
interrupt playback when positioning the cursor, clear this command.
Playing in Loop Playback mode
You can play an entire file or a selection in Loop Playback mode. In Loop Playback mode, the audio is played in a continuous loop.
Click the Loop Playback button ( ) on the transport bar (or press Q) to turn Loop Playback mode on and off.
Tip:
When Options > Seek Cursor on Playback is selected, playback will restart when you position the cursor. If you do not want to
interrupt playback when positioning the cursor, clear this command.
Playing a selection
You can play specific portions of audio data by creating selections in the waveform display.
1.
Drag the mouse within the data window. Notice that the waveform is selected as the mouse is dragged.
2.
Click the Play button ( ). Only the selection plays.
Selection status bar
Tip:
When Options > Seek Cursor on Playback is selected, playback will restart when you position the cursor. If you do not want to
interrupt playback when positioning the cursor, clear this command.
62
| CHAPTER 3