Sony PDW-75MD, Инструкция по эксплуатации

Страница: 41 / 103

41
Playback
Chapt
er
3
Rec
o
rd
ing and
P
la
y
bac
k
To start playback
Press the PLAY button.
Playback starts.
When two or more clips are recorded on the disc, they are
played back continuously.
To jump to the next or previous clip, then start
playback
Use the PREV button, NEXT button, jog dial, or shuttle
dial.
To stop playback
Press the STOP button.
If you play back to the end of the last clip, playback
automatically stops.
If, in this state, you press the PLAY button, the message
“ALARM DISC END.” appears on the display.
To carry out playback again, move back to the desired clip
using the PREV button, jog dial or shuttle dial.
To set shot marks
While playing back a disc, you can set essence marks such
as SHOT MARK1 and SHOT MARK2 in desired frames.
To set a SHOT MARK1 or SHOT MARK2, hold down the
M
/MARK1 or
m
/MARK2 button and press the SET
button.
To delete or change essence marks, use the supplied PDZ-
1 Proxy Browsing Software. See “Using PDZ-1 Proxy
Browsing Software” in Chapter 4 (page 66) for more
information about installing the PDZ-1 software. See the
online help of PDZ-1 for more information about using
PDZ-1.
You can delete SHOT MARK1 and SHOT MARK2 in the
CHAPTER screen. For details, see “To delete shot marks
at chapter positions” (page 45).
Searching for Clips with Thumbnails
(Thumbnail Search)
You can display thumbnail images (index pictures) of all
clips on the disc, and use them to cue up a desired clip.
To display a list of thumbnail images
With the SUB CLIP button off, press the THUMBNAIL
button, turning it on.
A list appears showing thumbnails of 12 clips on the disc,
including the clip being currently played back. (In the
following description, this is referred to as the “thumbnail
screen”.)
a) When a title has been assigned to a clip (see page 52) , the title is enclosed
in double quotation marks, for example “TITLE00001”.
b) A mark is shown to indicate that the thumbnail (index picture) is not the
first frame of the clip. (See “To change a thumbnail image (index
picture)” on page 42.)
To return to the original screen
Press the THUMBNAIL button, turning it off.
In any of the following screens, you can press the
THUMBNAIL button to return to the original screen.
PHONES
VAR
JOG
MARK1
MENU
PAGE DISPLAY
SUB
CLIP
F1
F5
F4
F3
F2
SHIFT
CLIP
MENU
ESSENCE
MARK
SET
THUMB
NAIL
RESET
OUT IN
MARK2
SHUTTLE
TOP
KEY INHI
EXPAND
CHAPTER
F REV F FWD END
PREV NEXT PLAY STOP
STANDBY
REC
EJECT
CH 1 CH 2 CH 3 CH 4
NETWORK
LOCAL
REMOTE
ACCESS
LEVEL
REC
VARIABLE
PRESET
PB
PREV button
PLAY button
NEXT button
STOP button
M /MARK1 button and m /MARK2 button
Jog dial
Shuttle dial
Name of currently
selected clip
a)
Thumbnail (index picture) of
currently selected clip
b)
Sixth clip is selected from
a total of 34 clips.
Clip information (recording date and time, initial timecode,
total length, and so on)
Recording date and
time of selected clip
Total length of selected clip