1-9
MVS-8000A/8000ASF
4.
Push the portion of the HK-PSU04 marked by the
arrow and insert the HK-PSU04 into deep end as far as
it will go.
5.
Secure the HK-PSU04 with the two screws removed in
step 3.
6.
Attach the PS cover and the front panel by reversing
the installation steps of 1, 2.
1-4-4. Installing the BZS-8250
For the installation procedure of the software options BZS-
8250, refer to the MVS-8000A/8000ASF System User’s
Guide.
HK-PSU04
PSW3
x
6
PSW3
x
6
(The illustration shows the MVS-8000A.)
1-4-3. Installing the HK-PSU04
The HK-PSU04 is used after it is installed in the MVS-
8000A or MVS-8000ASF.
n
Before installing the HK-PSU04, be sure to turn off the
main power. If the HK-PSU04 is installed while the main
power is turned on, it can result in electrical shock or
damage to printed circuit boards.
Installation procedure
1.
Remove the front panel of the MVS-8000A/8000ASF.
(Refer to Section 1-4-1.)
2.
Remove the two screws (B3
x
5) fixing the PS cover,
and remove the PS cover.
3.
Remove the two screws (PSW3
x
6) fixing the blank
panel to the location where the HK-PSU04 is going to
be installed. Then remove the blank panel.
n
Store the removed blank panel in a safe place.
PSW
3
x
6
B3
x
5
B3
x
5
Blank panel
PS cover
(The illustration shows the MVS-8000A.)
